Microsoft word - msds_torrbollen dump eater eng .doc

MATERIAL SAFETY DATA SHEETS – NPD

DAMP EATHER TORRBOLLEN 500 gram
Section 1 : Chemical Product and Company Identification
Product Identification
Distributor & Manufacturer : Säljtema i Linköping AB Address : Section 2 : Composition / Information of Ingredients

Chemical Name

Section 3 : Hazard Identification
Physical state
: package powder desiccant, changes to gel when saturated. : No health hazard in normal industrial use. However, health hazards do exist as a result of the dust generated if the container is cut, split or otherwise compromised. Prolonged or excessive exposure to dust may cause lung damage. Dust can be irritating to eyes and skin. : This material is normally packaged and contained in a bag and wrapped by plastic. If the plastic and bag are Note : The statements made here are intended to describe the product with regard to necessary safety
precautions. This information relates to the specific material designated and may not be valid for such material used in combination with any other materials or in any process. Such information is to the best of our knowledge and belief, accurate and reliable as of the date complied. However, no presentation, warranty or guarantee is made as to its accuracy, reliability or completeness. It is the user’s responsibility to satisfy himself as to the suitability and completeness of such information for his own particular use. We do not accept liability for any loss or damage that may occur from the use of this information. MATERIAL SAFETY DATA SHEETS – NPD
opened, prolonged or repeated inhalation of the dust may cause irritating to respiratory tracts. : none of the components present in this material at concentration is equal to or greater than 0.1% as listed by IARC, NTP, OSHA or ACGIH as a carcinogen : no traces of Dimethyl Fumarate, Formaldehyde and
Section 4 : First Aid Measures
Eye Contact
: mechanical irritation – remove particle. Seek medical help if : normally not needed. If large quantities are ingested, seek : remove immediately to fresh air. Seek medical attention if cough or other symptoms develop or persist. : In case of adverse exposure to vapors and / or aerosols formed at elevated temperatures, immediately remove the affected victim from exposure. Administer artificial respiration if breathing is stopped. Keep at rest. Call for prompt medical attention. : For hot product (molten product), immediately immerse in or flush affected area with large amounts of cold water to dissipate heat. Use soap if necessary. Seek medical attention if effects persist. Cover with clean cotton sheeting or gauze and get prompt medical attention. No attempt should be made to remove material from skin or to remove contaminated clothing. Section 5 : Fire Fighting Measures
Flash point (method)
Note : The statements made here are intended to describe the product with regard to necessary safety
precautions. This information relates to the specific material designated and may not be valid for such material used in combination with any other materials or in any process. Such information is to the best of our knowledge and belief, accurate and reliable as of the date complied. However, no presentation, warranty or guarantee is made as to its accuracy, reliability or completeness. It is the user’s responsibility to satisfy himself as to the suitability and completeness of such information for his own particular use. We do not accept liability for any loss or damage that may occur from the use of this information. MATERIAL SAFETY DATA SHEETS – NPD
: Use extinguishing agent applicable to surrounding fire Use water fog, foam, dry chemical or CO2 : Avoid excessive heat, avoid strong oxidizers, : Treat as solid that can burn. Molded part generally burns with a low smoke density and dripping flame. Fire-fighting instructions/equipment : as in any fire, wear self-contained breathing apparatus operated by pressure-demand mode and full protective gear. : Standard procedures for Class A fires. Material will not burn unless preheated. Do not enter confined fire area without full bunker gear (helmet with face shield, bunker coats, gloves rubber boats), respiratory (including positive pressure NIOSH//MSHA approved self-container breathing apparatus) and eye protection required for fire fighting personnel. Use water spray to cool exposed surfaces and to protect personnel. Isolate “fuel” supply from fire. Extinguish the fire by cooling with water spray. Section 6 : Accidental Release Measures
Safeguards (Personnel)
: Do not inhale if conditions are dusty and use appropriate : Collect in suitable containers for recovery or disposal : pick up large pieces, Flush residual with plenty of water. Section 7 : Handling and Storage
Note : The statements made here are intended to describe the product with regard to necessary safety
precautions. This information relates to the specific material designated and may not be valid for such material used in combination with any other materials or in any process. Such information is to the best of our knowledge and belief, accurate and reliable as of the date complied. However, no presentation, warranty or guarantee is made as to its accuracy, reliability or completeness. It is the user’s responsibility to satisfy himself as to the suitability and completeness of such information for his own particular use. We do not accept liability for any loss or damage that may occur from the use of this information. MATERIAL SAFETY DATA SHEETS – NPD
Handling : Use of proper hygiene practices when handling product in workplace. Wash hands after handling and before eating. Keep away from the eyes. : Store in dry area and do not open outer plastic bag before use as it will become activate. Do not store near flame, or heat or strong oxidants such as hot or concentrated nitric acid or fuming sulfuric acid. Section 8 : Exposure Controls / Personal Protection
Personal Protective Equipment
: None needed during normal use and handling : None needed during normal use and handling : None needed during normal use and handling Exposure Guidelines
Applicable Exposure Limits : OSHA HAZARDOUS COMPONENTS
Section 9 : Physical and Chemical Properties
Physical Data
Boiling
Section 10 : Stability and Reactivity
Chemical Stability
Section 11 : Toxicological Information
Carcinogenicity : N/A
Section 12 : Ecological Information
Ecotoxicological Information
This material is part of mineral origin. It is not biodegradable. Note : The statements made here are intended to describe the product with regard to necessary safety
precautions. This information relates to the specific material designated and may not be valid for such material used in combination with any other materials or in any process. Such information is to the best of our knowledge and belief, accurate and reliable as of the date complied. However, no presentation, warranty or guarantee is made as to its accuracy, reliability or completeness. It is the user’s responsibility to satisfy himself as to the suitability and completeness of such information for his own particular use. We do not accept liability for any loss or damage that may occur from the use of this information. MATERIAL SAFETY DATA SHEETS – NPD
Section 13 : Disposal Consideration
Waste Disposal
: cut open the bag, empty the contents into suitable containers and dispose of the contents as organic waste. The polyethylene and polypropylene bag is recyclable but maybe disposed of as industrial waste by an approved contractor. Section 14 : Transportation Information
Shipping Information
DOT Shipping Name : this product is not classified as hazardous for transportation, by
air, sea and road freight.
Section 15 : Regulatory Information
IKEA Specification IOS-MAT-0010 On Total Lead Content IKEA Specification IOS-MAT-0010 On Total Cadmium Content : Pass IKEA Specification IOS-MAT-0010 On Organo Tin Content U.S. 21 CFR F.D.A. Regulation Part 177.1520 Clause 3.1a And 3.1b for Olefin Copolymer SGS test On Dimethyl Fumarate, Formaldehyde and Cobalt Polyester Bag (Polyethylene Bag) : SARA 311/312 : this product is not classified as hazardous under SARA 311/312 None of this product’s components are listed under SARA 302 (40 CFR 355 Appendix A), SARA section 313 (40 CFR 372.65) or CERCLA (40 CFR 302.4) Natural Wood : WHMIS : Note : The statements made here are intended to describe the product with regard to necessary safety
precautions. This information relates to the specific material designated and may not be valid for such material used in combination with any other materials or in any process. Such information is to the best of our knowledge and belief, accurate and reliable as of the date complied. However, no presentation, warranty or guarantee is made as to its accuracy, reliability or completeness. It is the user’s responsibility to satisfy himself as to the suitability and completeness of such information for his own particular use. We do not accept liability for any loss or damage that may occur from the use of this information. MATERIAL SAFETY DATA SHEETS – NPD
There are two components in here. Both of them are Plastic. Both of them are recyclable so they can be put in the plastic waste only. It doesn’t need to separate them. If thermally decomposed, flammable/toxic gases may be released. Upon combustion with insufficient air, carbon monoxide and gaseous hydrocarbons may be generated. Incinerating PE&PP Membrane requires temperatures about 300°C to produce smoke and combustible gases. Material will not burn unless preheated. Do not enter confined fire spa without full bunker gear (helmet with face shield, bunker coats, gloves rubber boats), respiratory (including positive pressure NIOSH approved self-container breathing apparatus) and eye protection required for fire fighting personnel. Use water spray to cool fire exposed surfaces and to protect personnel. Isolate “fuel” supply to fire. Extinguish the fire by cooling with water spray. Calcium Chloride: UNITED STATES SARA TITLE III (SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT) Fire : No; Chronic :No 311/312 hazard categories : does not meet any hazard categories Title III Notes : this product contains no substances which are defined as toxic chemical under the reporting requirements of section 313 of Title III of Superfund Amendments And Reauthorization Act of 1986
Section 16 : Other Information
Reason for issue
: Additional data on (non) presence of certain chemicals This MSDS replaces the November 12, 2008 MSDS. Note : The statements made here are intended to describe the product with regard to necessary safety
precautions. This information relates to the specific material designated and may not be valid for such material used in combination with any other materials or in any process. Such information is to the best of our knowledge and belief, accurate and reliable as of the date complied. However, no presentation, warranty or guarantee is made as to its accuracy, reliability or completeness. It is the user’s responsibility to satisfy himself as to the suitability and completeness of such information for his own particular use. We do not accept liability for any loss or damage that may occur from the use of this information.

Source: http://www.saljtema.se/pdf/SDB_Torrbollen_Dump_Eater_eng.pdf